There are many reasons why you probably SHOULDN’T Retrobrite your yellowing retro devices. The harsh chemicals are not good for your skin, and CAN break down the plastic over time if you continue to reapply the Retrobrite over time. Also, while this does work on reducing (and sometimes removing completely) the yellowing of your retro device, the yellowing will come back. Unless you change the materials or find a way to break down the plastic on a molecular level and reconstruct with better materials, the plastic will continue to age and yellow.
What is Retrobrite?
I realized quickly when I began collecting that many of us are not the biggest fan of the look of aging retro consoles. Sometimes systems like the NES and SNES yellow severely, while others are lucky and stay minty fresh. More than likely, you will come into the hands of the less pretty ones. And if you are like me, you would love to see that original color come back to life. Enter Retrobrite.
While the original “formula” of Retrobrite is somewhere on the internet, you can read more details about where the idea came from here. I will link some videos you can watch on how you can attempt this with your own consoles. It is not perfect, but it works. And you will be shocked on where you could buy the materials you need.
My NES restoration
My first attempt at this was with my NES console and controllers. It turned out better than I thought, but it certainly has areas where it could have been much better. Here are some pictures:
So you want to try it out too?
Lucky for you, it is pretty easy as long as you have patience and the right materials. Also, it helps to set your expectations low-this is not a perfect science unfortunately. As you can see in my pictures, there are certainly some areas where the plastic did not completely transition to the original color, but it still looks better than yellow. Regardless, I suggest you check out the following people for various ways you can Retrobrite your old consoles. Please note, some of the materials you may need could be hard to find. The salon cream I ended up finding that is recommended by most people was over priced everywhere but actual beauty stores. So I strongly suggest you check the places it, you know, is actually supposed to be sold at.
The 8-Bit Guy is the place to go if you need plain and simple instructions (with multiple techniques might I add) on how to Retrobrite your consoles. There are also plenty of others on Youtube or just on various forums (reddit) that have instructions as well. But for me, I would put my money on The 8-Bit Guy.
What is next?
I have a few things that need to be repaired within my collection, so expect to see some posts (and maybe a repair video) coming in the future. Currently, I am on the hunt for a good soldering iron an materials to assist with the repairs. So stay tuned!
Recently, I was able to find a source that was assisting their father in selling his video game collection of 40 years. When they mentioned the size of the collection, I may have shed a tear or two. For privacy reasons, I will not disclose my source, but I will be buying from them multiple times in the future. So, why don’t we take a look at the goodies?
What Is Next?
The SNES I acquired actually does not power on, so that is on the list to repair. Luckily, I have a few things I can do to narrow down the issue. My hunch is a bad fuse, which is an easy fix. However, I need to get my hands on a multimeter and a soldering iron. Plus, the Pokemon Special Edition Gameboy Color actually did not work originally. A battery had exploded, at one point, when it sat in the battery casing. So there was massive corrosion on the terminals and on the board. After a good cleaning, it worked like a charm. Only, the speaker was toast.
Despite the repairs that are needed, I was very please. Not pictured is another copy of Pokemon Blue I received and another Atomic Purple Gameboy Color. My goal is to probably resell/trade these in games to add to the collection. If you are interested, let me know!
Starting off, the Collector’s Edition is available for both the PC and the Nintendo Switch, appropriately priced at $72 (PC is $69). To most people, it may seem crazy to spend $72 dollars on a game that normally cost $15 (or less when on sale). However, this Collector’s Edition is not meant for the casual Stardew fan; it is for the crazy people like me who eat, sleep, and breath the game. Thankfully, Fangamer has made it possible to simply just purchase the physical edition of this game for both PC($29) and Switch($34).
So what does the $72 give you?
Wooden Lapel Pin
Physical Game and Case
AN ACTUAL MANUAL!
How Is It?
After opening the Collector’s Box, which has killer artwork on it, you are presented with the physical copy of the game (which includes an actual manual, something you don’t see anymore with actual helpful information). But the exciting stuff is behind the insert holding the game.
The Farm Deed is printed on some high quality stationary/card stock that I almost do not want to touch to save its condition. The Wooden Lapel Pin, Junimo comic, and cleaning cloth all seem to be made of high quality material. The design and artwork on everything is nothing short of fine pixel art, but my favorite piece of this is the wooden standee.
It is made of high quality pine wood, and comes with a protective lay on both sides of every piece. When put together, it looks absolutely gorgeous. ConcernedApe has always done a fantastic job with Stardew Valley, and I love the collaborations he is partaking in, and hope he continues to be active with his community. I am so excited to happily place this on my shelf, along with all the contents that come with it.
There is a BOARD GAME?
Yes, there is! It was earlier this year, shortly after the 1.5 update released on consoles, that ConcernedApe dropped a bomb shell. The Stardew Valley Board Game was available for purchase through the game’s website. At the time, I was purchasing the Collectors Edition so I could not get both, which is a shame because the board game sold out like hot cakes. Luckily, ConcernedApe already announced a new printing was already underway and fans would be able to buy more in the future. You can check it out here, or simply google it to find so many raving reviews of how well put together the game is.
What is next?
I have some purchases lined up that I am excited to share with everyone, including some posts on some common repairs that can be done to older gaming consoles and handhelds. I should be posting these within the next few weeks. Until next time!
So I wanted to give everyone an update on where the collection is at this point. I really started collecting Nintendo consoles and games at the beginning of March, coincidently as COVID-19 was just starting to consume our lives. Little did I know it would also assist in the further ballooning of “retro” games and console prices. Luckily for me, I was able to snag all but the Wii U and SNES last year for the Nintendo consoles.
The next focus will be on the handhelds next, but I really want to get an SNES before those prices get worse than they already are. Additionally, I am trying to snag as many of the Pokemon games that I can. That is going to also be a challenge as most of them are raising in price literally by the day.
Apart from that, I did recently purchase the Stardew Valley Collector’s Edition for the Nintendo Switch and I plan to do a post about that unboxing. Plus, I do want to show people how easy it is to retrobrite older consoles that have yellowed over the years. There are plenty of ideas in the hopper for the collection related posts, but those will ramp up as the garage sale season starts. With being fully vaccinated by end of April and working from home, I can take full advantage of the sales around me.
If you know, or you yourself are looking to sell some of your older retro games, feel free to reach out to firstname.lastname@example.org!
After talking about Ola’s MaintenanceSolution for SQL Server, I wanted those new/accidental DBAs out there to make sure they add a very helpful (and wildly used) stored procedure to their toolbox.
Created by Adam Machanic, sp_whoisactive provides the user with all the current active connections running at the time of execution. This can be very useful when trying to identify what may be inflicting pain on your SQL Server or, in some cases, help you figure out who keeps executing that pesky “select * From”. It is easy to use, and is well documented. You can read the documentation here or on Adam’s Github page. He has recently moved his updates to Github, so if you want the most up to date version of sp_whoisactive, go there.
As always, I do want to point out a useful parameter that pulls the sleeping spids out as well, so you can see the connections that are still open, but just waiting for the “next task.” This is an over generalization but the idea is that these could still impact your SQL Server’s performance, even if they are not active currently.
sp_whosisactive @@show_sleeping_spids = 2
We can see the session_id 54 is in a “sleeping” status. While it is not currently querying our database server, at any time, this user could execute a new query. Where this is helpful is sometimes identifying a user or even an application, with an open connection to the server that “recently” executed the query (details in the “sql_text” column of the results). We can see system data of the performance impact the query had, and in some aspect, what to expect next time they do it again. I am over generalizing here, and I am sure some of you are screaming at the screen that I am forgeting about X detail, Y context, etc. But, for those out there not “classically” trained in Database Administration, this is what they need.
Finally, my last tip, just make sure to install the query on the same database (whether that is your master database or a user database created for your tools) as the rest of the stored procedures you use for the maintenance of your servers. Hopefully this quick post helped someone out there. Thanks again for reading.
I mean it this time when I say this will be a quick one. For most DBAs, this information is already a part of your bread and butter. But for some accidental DBAs, this information may be useful.
One of the first things that was drilled into my brain was to ensure that we had a solid maintenance plan for our SQL Servers, complete with a consistent backup schedule and troubleshooting tools to assist when a problem arose. Luckily, the SQL Community has developed many free, open source tools that are widely used across many industries. Today, we are looking at one of the most importance tool of them all.
This is the first thing I deploy to my new servers after SQL Server has been installed. This sets up various jobs (backups, integrity checks, reindexing, etc) that you can easily schedule to your hearts content. The parameters are WELL documentated and the community can assist with anything you run into if you find an issue installing the plan. Out of the box, this is solid but the customization is endless. Below are the general parameters that you SHOULD look at when installing the plan, as your needs will be different than mine.
USE [master] -- Specify the database in which the objects will be created.
1) I use a separate database, like a “DBADMIN”, to store all my tools in rather than master. But if you use master, just keep it set to this.
DECLARE @CreateJobs nvarchar(max) = 'Y' -- Specify whether jobs should be created.
2) If this is your first install, leave this to ‘Y’. If you are updating your plan, due to an updated version pushed out by Ola, make sure to switch this to ‘N’.
DECLARE @BackupDirectory nvarchar(max) = NULL -- Specify the backup root directory. If no directory is specified, the default backup directory is used.
3) I strongly suggest backing up your databases to another server, and put the network path here. This will set the default backup path for your jobs. So change NULL to that path.
DECLARE @CleanupTime int = NULL -- Time in hours, after which backup files are deleted. If no time is specified, then no backup files are deleted.
4) For me, 72 hours works here. But that does not mean the need of your client/your customer will be the same. Make sure to ask them! And if they don’t tell you, then maybe it is worth the effort to sit down with them to discover your RTO/RPO. (More on that in another post?)
DECLARE @OutputFileDirectory nvarchar(max) = NULL -- Specify the output file directory. If no directory is specified, then the SQL Server error log directory is used.
5) Find a location on your server to output a seperate log of this plan. You want this, trust me. With the path, you can always take a look at the log to see why a job failed in an easier to read format 🙂
DECLARE @LogToTable nvarchar(max) = 'Y' -- Log commands to a table.
6) I always leave this as “Y” as there are times where I need to see what commands were passed (in case I screwed something up) in a previous job execution. The table will be created under whatever database you have installed the plan in.
That Wasn’t So HARD!?
After that, go ahead and execute the plan and now you have a solid maintenance plan! Go ahead and adjust the schedules to your liking, and make sure to include your operator in those notifications if the job fails!
In the last week of February, I think I will try to do some smaller posts every week with something new I learned or found useful while conducting my job. The goal will be to submit small tidbits of info that will provide some sort of value for those seeking it! This week, it is going to be about changing your default backup path for your database maintenance jobs!
There will come a time where you might need to change your default path for your backup jobs. For some of you, this might be a pretty straightforward task on a handful of servers.For the rest of us, it is not ideal to hop from one instance to the next, updating the default paths manually across several servers. Thankfully for everyone, our community has a solution (most of the time) for our daily struggles. And this situation is no different!
Identifying WHERE your backups are going
I know you are probably thinking, “How could ANYONE not know where your backups are going?” I will simply respond by saying please see any sysadmin that was dubbed an accidental DBA by their company and told to “just figure it out.” Plus, maybe you are someone new to the gig and really don’t have any guidance to where anything is! These things happen people!
A quick solution would be to connect to your database servers and run the following command:
FROM dbo.sysjobs j
JOIN dbo.sysjobsteps js
ON js.job_id = j.job_id
JOIN master.dbo.sysservers s
ON s.srvid = j.originating_server_id
WHERE js.command LIKE N'%BACKUP%'
This will look through system databases, identify commands where a backup path is mentioned, and output the value to you. From this info, you can identify what the job id is, servername, name of job, what step the backup command is in, and then the command itself. Unfortunately, I do not have a test server to show you the output of the command, so you will need to just trust me (or run it on your server!).
Change the backup path!
Now, the next step, with the use of the following script, makes changing default backup paths an absolute BREEZE.
DECLARE @Find nvarchar(max);
DECLARE @Replace nvarchar(max);
DECLARE @DebugOnly bit;
SET @Find = N'\\SERVERA\Backups';
SET @Replace = N'\\SERVERB\Backups';
SET @DebugOnly = 1;
IF OBJECT_ID(N'tempdb..#excludeJobs', N'U') IS NOT NULL
DROP TABLE #excludeJobs;
CREATE TABLE #excludeJobs
JobName sysname NOT NULL
PRIMARY KEY CLUSTERED
INSERT INTO #excludeJobs (JobName)
VALUES ('The Name of a job you want to skip');
IF OBJECT_ID(N'tempdb..#deets', N'U') IS NOT NULL
DROP TABLE #deets;
CREATE TABLE #deets
JobName sysname NOT NULL
, StepName sysname NOT NULL
, OldCommand nvarchar(max) NOT NULL
, NewCommand nvarchar(max) NOT NULL
, PRIMARY KEY (JobName, StepName)
DECLARE @JobName sysname;
DECLARE @StepName sysname;
DECLARE @StepID int;
DECLARE @Command nvarchar(max);
DECLARE @NewCommand nvarchar(max);
DECLARE cur CURSOR LOCAL FORWARD_ONLY STATIC READ_ONLY
FROM dbo.sysjobsteps sjs
INNER JOIN dbo.sysjobs sj ON sjs.job_id = sj.job_id
WHERE sjs.command LIKE N'%' + @Find + N'%' ESCAPE N'|' COLLATE SQL_Latin1_General_CP1_CI_AS
AND sj.enabled = 1
AND NOT EXISTS (
FROM #excludeJobs ej
WHERE ej.JobName = sj.name
ORDER BY sj.name
FETCH NEXT FROM cur INTO @JobName
WHILE @@FETCH_STATUS = 0
SET @NewCommand = REPLACE(@Command, @Find, @Replace) COLLATE SQL_Latin1_General_CP1_CI_AS;
INSERT INTO #deets (JobName, StepName, OldCommand, NewCommand)
SELECT JobName = @JobName
, StepName = @StepName
, PriorCommand = @Command
, NewCommand = @NewCommand;
IF @DebugOnly = 0
EXEC dbo.sp_update_jobstep @job_name = @JobName, @step_id = @StepID, @command = @NewCommand;
PRINT N'Updated ' + @JobName;
FETCH NEXT FROM cur INTO @JobName
IF @@TRANCOUNT > 0
PRINT N'Transaction rolled back';
Lets focus on the parameters you can modify, which make this script super helpful. In the “SET @Find” parameter, insert the backup path you have already identified either on your own or via the script I provided before. Next, you will want to add in the “SET @REPLACE” parameter the NEW default path you would like to update to all of your backup jobs. Finally, and this is my favorite part, is the “SET @debugOnly” parameter. By default, I leave this set to 1 as it will show you the output of running the script without actually changing the default path. Once you have set your parameters, run the script and take a look at the details provided. In the results, you can see the JobName, StepName, OldCommand, NewCommand, OldOutputfile, and NewOutputfile. By running the script in debug mode, you can verify if your new paths are correct. Once you are confident in the new path, set the debug mode to 0, and execute the script. I recommend running the script twice, as the second execution should come up blank signifying that your change was made successfully.
Do the backup jobs run successfully with the new path?
Since I cannot account for every situation, I will speak plainly. I strongly encourage that you run a system database backup just to verify that the backups can write to the new path. The last thing you want to do is make changes to the backup paths, and then fail to verify if the database server can even write to the new path. My guess is you will receive an unwanted call when the database server starts sending emails out saying backups are failing….
The script I provided above was not my own to be fair, and you can find the author’s write up here
I just wanted to post this as a “lessons learned” for me, a very green DBA, as I wish I would have known this before I ran into an issue in production. Yes, production. I hear all the people screaming “You Monster! How could you!” Believe me, I was in the same boat. Thankfully, many other people have done the same!
So, let us get to the point. There will come a time when someone runs a query that bloats your tempdb (and any of the separate data files) and you begin to receive alerts. For some people, the first response should ALWAYS be to just extend the drive, then look at why your tempdb expanded to fill the drive.
However, some of us may not be as lucky and have to find a way to make space. In this case, we shrink-responsibly!
My first move was to make sure I could even shrink the files.
DBCC SHRINKFILE (Tempdev, 20480);----remember this number is megabytes. Make sure to be exact.
DBCC SHRINKFILE (Temp02, 20480);
If all goes well, you should be good right? Some people suggest that you do not need to restart SQL Service. However, in my case I needed to as I had another piece to the problem I have not touched on yet. Regardless, I would strongly suggest if you have already scheduled the downtime to shrink the tempdb files, it would not hurt for the restart.
BUT! My problem was not a rouge transaction that expanded the tempdb files to max out the drive. No, the problem was my stupidity in a previous scheduled downtime to add more tempdb files to match the rest of our database servers. In doing so, I added TOO MANY. Yes…TOO many. So I was going back and fixing my mistake. In this case, the SQL gods were making it a point to teach me a lesson and here is why.
I had to shrink all of the files down, and delete the extra one. So I shrank the files, and went to delete the extra tempdb file. In order to do so, a file needs to be “empty” in order to be removed. So….
DBCC SHRINKFILE (LogicalFilename, EMPTYFILE);
And then the problem hit me:
DBCC SHRINKFILE: Page 3|44101 could not be moved because it is a work table page.
Msg 2555, Level 16, State 1, Line 1
There are work tables present. Of course!
Now, you could try and restart the instance to see if the worktables magically go away, but I want to reduce the amount of times we restart the service. Therefore, I took to the community and came across some suggestions about clearing various caches(sp?). Let’s give it a shot!
DBCC FREESYSTEMCACHE ( 'ALL');
But life isn’t easy right? Why would it be! I tried again to empty the file and it did not work. Thankfully, I have a FANTASTIC mentor, who suggested “Why don’t you just try to shrink it down to 1MB, do a restart, and delete it.” At this point, I was happy for suggestions. So….
DBCC SHRINKFILE (Temp05, 1);
Then the restart of the service. So far so good, as the file DID shrink to close to 1MB. Let’s try to delete via SSMS…and SUCCESS! I could not believe it. I spent two nights, during off hours, to try and fix this and the answer was as simple as just shrinking the file to 1mb, and delete.
I would like to link two wonderful articles that I found in the process of battling the tempdb, and you should definitely follow both Erin and Andy. They are fantastic people, and smart. Very smart.
Moral of the story: Don’t shrink, add space. Because, should you ever really shrink your SQL Server database? Andy has the answer for you
Back in 2019, a group of co-workers and I decided to start an unofficial run club at work. We met once a week after work, ran a few miles locally, and just encouraged each other to keep running on our own. I have dabbled with running when I was younger, and loved it. However, my body was in the middle of a huge growth spurt and it HURT to run. I gave it up, tried a few times over many years, but it never stuck.
Flash forward to the beginning of 2020, and we were regularly together decent miles multiple times a week on our own or after work. COVID-19 comes around full swing, and our typical running routine went straight to solo runs. I knew it was going to suck without the guys, but I knew it was for the better. Since we could not be together, we started a running club in Strava, which would help us keep each other accountable and encourage one another to run. Some of the group fell off the wayside, no harm no foul. Thankfully, I had two co-workers stick to it and we certainly made it a competition throughout the year to keep running.
I am super grateful that I started running because it came in as a clutch stress reliever during times we have all experienced. This year alone, I learned how to overcome various running injuries, found my recovery pace, discovered how hard it was to not run, and understood WHY everyone recommends not to go all out on the first mile on your first race. In my first race ever (COVID-Style), I blew my energy on my first mile of a 5k and regretted EVERY second of it in my second and third mile. While I ran my fastest mile ever in my life that day (6:07min), I ended up aggravating an injury I experienced earlier that year (Plantar Fasciitis) which set me back a week or so.
The last and final part of this journey actually started with a community I wish I would have jumped into at the first leg of my 2020 running year. One of the co-workers in the run group introduced me to Kofuzi and The Ginger Runner, two YouTubers from the YouTube running community. I originally watched their videos for the reviews on the many shoes, apparel, and accessories for running to see what was worth buying. One after another, I watched their videos and became integrated into the community. They are part of my inspiration, and motivation, to keep on taking it one step at a time. Both are heavily involved in their community and really care about their followers. It is really refreshing, especially now, to see how much they give back to their community and engage their followers in their efforts. Absolutely fantastic!
So where this long winded post is coming to is my recap of the year of running but ALSO my 2021 running “themes”.
2021 Running Themes
Half Marathon Attitude with Marathon Dreams– Focus on increasing weekly mileage to train my body to complete half marathons
COMFORTABLY– Find my target pace and get comfortable with it-Avoid injury by constantly working on recovery
Run Healthier– Buy the proper apparel -Rotate shoes more often, pending I have pairs to rotate in-Diversify my running workouts
Trail-Hunter– Get out on a trail and run-Rotate trail running into the work schedule-Don’t get ticks
500 Mile Club– This is to hit a minimum of 500 miles. I know I can hit this based off 2020’s stats, but I think increasing to 500 is a healthy, and safe goal. However, I know if I increase my weekly mileage from the 17 miles I am currently doing now to 30 miles , stay healthy, and stay motivated I will make that goal.
So, if you are interested, follow me on Strava- and join me in tackling the next run.
I have been wanting to do this for a long time and initially thought the process of narrowing down a “top ten” list for my favorite video games of all time would be easy. Fun fact, it was not. I had plenty of runner ups, and internal discussions on why something should make the list. At the end of the exercise, this is the list that I came up with and I am pretty proud of it to be honest. However, I specifically wanted to avoid rating them 1-10, 1 being the best game I have ever played. Each of these games equally is “the best game” I have ever played because each of the games is associated with partially a memory of the good times I had and the fun I experienced when playing the game. With that being said, here is my list!
For me, this was an easy pick to add to my top 10 list. When Stardew Valley first released in February 26, 2016, I was not really sold. A great deal of my friends picked the game up and were instantly hooked, but I was still focused on playing Battlefield 4 and other more “mature” games than this. Farming? I did this in like, Harvest Moon on the Gamecube when I was a child! This is silly.
Flash forward to the year my wife and I found out we were expecting and I was heavily playing my switch. Stardew went on sale on the eshop, I bought it, and the rest is history. The game provides so many levels of a RPG that I long for in many games, but adds a career based element that is rewarding (yet challenging!) With the varying elements of a dating sim, a dungeon crawler, and a collectors dream haven-I was set. To this day, I have put in countess hours of this game and will continue to do so as more patches come out. I own this on almost every medium to provide myself with ultimate coverage. If you want to learn about how wholesome and humble the developer is-Eric Barone, you should check out the chapter in Blood, Sweat, PIxels: The Triumphant, Trublen Stories Behind How Video Games Are Made by Jason Schreier. If you thought you loved the game before, you will certainly gain the utmost respect for him after reading the chapter.
Kingdom Hearts II
You might be asking yourself, “Why not the first Kingdom Hearts?” Well, I would have put this on my list but once you introduce the ability to dual wield key blades, the rest is history. This series was my real introduction, as a child, to Square Enix and their world of RPGS (JRPGS to be specific, but I guess this could be a one off if you look at it the right way). I had no experience with Cloud from FF7 or know the silly and lovable characters of Dragon Quest. When it was introduced to me, I was instantly hooked on the fact that we had Disney characters involved in a JRPG style story filled with random elements of ship building and the constant battle of who to add into your party.
While this game (and series) have some pretty telling flaws, like a story line running away in multiple directions, the game still grips me in every time I play it. I recently purchased a PS4 (yes trolls, in 2020) and bought the recent All in One collection for Kingdom Hearts, which includes the “remixes” and games that I missed over the years. In the process of purchasing the game, I also picked up the same strategy guide my parents and I used when running through the first and second game. Some people are rolling their eyes but LISTEN! They still had the stickers in the back of the book to help me track all the collectables!
I truly look forward to making my way through the games and playing KH II again. It holds so many good memories (no a joke towards..the game…you know..) and still holds up to the JRPGs being produced today.
I struggled with this one as I am/was a huge fan of the franchise. However, I think for most people it was all about just the game here. For me, it was different. I went further into the lore with this series and have read most, if not all, the books generated in this universe. That is why I was excited when it was announced that Halo: Reach was becoming an actual game. Halo: Fall of Reach was the first of the books I read in the Halo Universe and it immediately attached me to the characters that were never talked about in any of the existing games. When I got my hands on it, I remember playing at midnight in my dorm room while my roommates were asleep thinking to myself “Wow, this is perfect.” With the new addition of armor abilities that made sense, new weapons (including the DMR from ODST), Firefight( also from ODST), it was bound to find a spot on my top 10.
The story, graphics, and overall gameplay was top notch, and along with ODST, were Bungie’s last call before they jumped ship from Microsoft. ODST came close to bump this off the list, but Halo:Reach truly is THE best Halo game out there.
The Last of Us
At this current moment, I have not completed The Last of Us Part II, so I cannot put that on my list yet. But, I recently played through The Last of Us on PS3 at the end of 2019. Fun fact; I will remember this game forever because after playing it for the first time my wife went into labor 1 hour and 30min after I fell asleep. The longest day of my life, but it certainly will be one that I will remember for the birth of my daughter and finally being introduce to a game that would leave me hung over after I finished it.
Simply put, this game induced every emotion in me. I would say it was not a “fun game to play” in the sense that I was jumping for joy on how joyful everything was. Not one bit. This game was challenging, but is a pure master piece. The story, the character interactions, the grief! Woof. I would recommend this game to everyone, because it appeals to all gamers in its own way.
World of Warcraft-Legion
Now-I know what you are thinking. Really? World of Warcraft?
Then I say, really? Fortnite?
In all seriousness, this is by far the best expansion year to date. For someone who has been playing World of Warcraft since the original game was released, this was the real winner. I continue to play on and off as it is a love hate relationship. I really enjoy the world, the ability to look for a raid (LFR), and the simplifying the talent tree as the game progressed. The level caps continue to increase but it needed something else. Legion brought that “something else” to the table with us returning back to characters I missed from the Burning Crusade and diving into the different factions of the Demon Hunters. Everything about this expansion made the game really enjoyable again to solo, or to play with your friends. I really wish there was not a subscription fee here because it is always the reason why I stop playing after time. I don’t want to be constantly thinking about the money I am spending to not play a game. Maybe they will eventually get away from that…but it is Blizzard….
The Legend fo Zelda: Breath of the Wild
Cheers to the first Zelda game I ever finished! Crazy, I know, but I could never finish a Zelda game. Not sure why, but it was just not for me. But, this game changed it all. Lucious scenery, fantastic controls, lovable characters, CHALLENGING dungeons/shrines, got to have collectables, and superb DLC make this game the best open world RPG I have ever played. I don’t think I have to really convince anyone here on this, so I will leave it at that.
Star Wars: Knights of the Old Republic
Arguably the best and last Star Wars game to date until Jedi Fallen Order came. I wish I still had the ability to find the stats for this game before steam on the original xbox because I played a ton of it. I played so much of it and needed more, I bought it for my first custom built PC, then again when it went on steam, and then again when it came to IOS. I used to play through the whole game at least once a year, every year, up until last year because I was always finding new paths I never followed, or conversations that I never had with my favorite characters. I was excited when it was announced that there would be an MMORPG game based on this universe, but unfortunately it was no where near as good as the original. Shame-Guess I will have to wait until the next equivalent comes out but my hope is pretty much lost since EA holds the future of that franchise in its hands……
Growing up, I played plenty of Armored Core and one of my best friends loved everything mech. Something we also loved was Battlefield 2. So when Battlefield 2142 dropped, my best friends and I jumped on the chance to pilot mechs, fly futuristic helicopter jets, and orbital drop on or from the Titans. Battlefield 2142 took everything from Battlefield 2 and made it better. You still had your typical territory contention battles, but added a new mode “Titan Conquest” that incorporated the new Titans into the well known game type. Deploy from the Titan, man one of its many turrets, or take off from the hanger bay to take control of flag locations that housed missile silos that would weaken the enemy’s Titan shields. Raid the Titan, destroy it from within, and epically escape from the exploding ship in typical Michael Bay explosions. I recently tried to play this game only to find the servers were all down. But! There is a pretty active community out there trying to kickstart some hosted servers to play on. I might be looking at that sooner rather than later.
Call of Duty 4: Modern Warfare
Call of Duty used to be known for its epic campaigns. So far, this one was the best. And…the multiplayer was pretty dang addicting too. So it may not be a shock to you that I not only 10th prestige’s my friends account by playing so much but also my own account. I would love to see the amount of hours I put into this game and I think my parents would be able to give you an idea too…
I don’t know how to describe why this game was so addicting or why multi-player did so well but I think it had something to do with the fact that it was the first Call of Duty game set in a “modern” setting, with well designed maps, and the addition of perks enhanced your gameplay made me throw countless hours into this game. I would love tell your that I didn’t miss out on social events because of this game, but that would be a big lie!
It would not be a top 10 list without a Pokémon Game. Yes, I said it. I am lucky to have been alive when Pokémon Red/Blue was released. Again, countless hours poured into the Pokémon Franchise. However, I am partial to Red and Blue because of what they introduced me to. So, when Gold and Silver came out, then Crystal, it was really the best of both worlds. Gold/Silver/Crystal introduce us to a new region, but you are also able to go through the Kanto region as well! I mean, how cool! And updated graphics! I was sold. I really love the introduction of breeding here, which really made it easy to get every Pokémon you ever wanted. If you are discouraged by the graphics, try out HeartGold or SoulSilver.
And that does it! I will add the top 10 list to the site and my twitter account for people to troll but I am glad to post this as my first post in the new year!